Adding Equipment to PLSS Campaigns

Take note

This overview will explain how to add Equipment to IMS-PLSS Campaigns.

To select the Equipment that will be part of the Campaign:

In the Equipment section, click on the Plus button.

Click on the Plus button to select the applicable Equipment.

An overview of all the available Equipment will be displayed. What Equipment will be displayed depends on the Campaign type and the Scope and/or Plan code on the Schedule:

Campaign Type	Schedule Scope / Plan code
CP Test Post Survey	Shows all Equipment with Plan code CP TEST POST SURVEY.
Corrosion Assessment Pipelines	Shows all Equipment with Plan code INTERNAL CORROSION ASSESSMENT and/or EXTERNAL CORROSION ASSESSMENT.
Underwater Eq. Activities	Shows all Equipment with: Scope: UNDERWATER EQ. ACTIVITIES (thus all Plan codes under this scope).

Campaign Type

Schedule Scope / Plan code

CP Test Post Survey

Shows all Equipment with Plan code CP TEST POST SURVEY.

Corrosion Assessment Pipelines

Shows all Equipment with Plan code

INTERNAL CORROSION ASSESSMENT and/or
EXTERNAL CORROSION ASSESSMENT.

Underwater Eq. Activities

Shows all Equipment with:

Scope: UNDERWATER EQ. ACTIVITIES

(thus all Plan codes under this scope).

For example, if the Campaign type is "CP Test Post Survey", only the Pipelines with the Plan code "CP TEST POST SURVEY" will be shown.
Select the pieces of Equipment for the Campaign from the list. For example, clicking the Plus button and searching for ‘camp’ will show the the list with applicable results:
After selecting the three pipelines and clicking OK, both the Equipment and Schedule will be updated:
The Equipment shows an overview of the selected pipelines. The Schedule section shows an overview of corresponding Schedules based on the Campaign type.