---
title: "Flange Equipment Details Page (Level 5)"
slug: "fcm-flange-equipment-details-page"
tags: ["FCM"]
updated: 2026-10-27T23:12:05Z
published: 2026-10-27T23:12:05Z
canonical: "ims-handbook.cenosco.com/fcm-flange-equipment-details-page"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://ims-handbook.cenosco.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Flange Equipment Details Page (Level 5)

The Flange Equipment details page contains 9 sections:

1. Details – general information about Flange Equipment.
2. Flange Design – the Design tab contains the input fields for the 3 different Flange calculations (including Tightening data and Recommended Spec), while the calculation results are shown on subsequent output tabs. See [Flange Equipment Design and Calculations](/v414/docs/flange-equipment-design-and-calculations).
3. Hierarchy.
4. Jobs – list of Jobs (to be) performed on this Flange Equipment. Here Jobs can be created, and Flanges can be Assigned to a Job.
5. Condition History - list existing or create new ECHs for the Flange Equipment.
6. Specs – Flange spec data.
7. Description – description of the Flange Equipment.
8. Drawings and Documents.
9. Attachments.

![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/fcm-navigation-%E2%80%93-main-menus-and-detail-pages-image-t9jfch7t.png?sv=2026-02-06&spr=https&st=2026-11-02T23%3A41%3A31Z&se=2026-11-03T00%3A41%3A31Z&sr=c&sp=r&sig=6iANNY8u%2F9FsVk8bpI7Ug2ze4GVYAY53pFG4ZRRzFig%3D)

Flange Equipment Details page – Details and Flange Design sections.

## **Flange Design and Calculations**

In addition to the Torque / Tension calculations, the following Flange calculations are also supported in IMS FCM (for more information see [Flange Equipment Design and Calculations](/v414/docs/flange-equipment-design-and-calculations)):

- WRC538 – WRC Bulletin 538 Analysis
- ASME Section VIII - ASME Sec VIII Div 1 2019 App 2
- PCC-1 - ASME PCC-1 Appendix O Analysis

The Flange Design section can be used to input the data for these calculations. The Design tab contains all the input fields (including Tightening data and Recommended Specs). Each calculation’s results are shown on a separate output tab.

Note: Tightening data is mandatory for performing Jobs. It is also possible to import this data while creating Flange Equipment.

## **Reports**

In addition to the normal Actions buttons, Custom Reports can also be generated from here.

![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/fcm-navigation-%E2%80%93-main-menus-and-detail-pages-image-fjqt43mr.png?sv=2026-02-06&spr=https&st=2026-11-02T23%3A41%3A31Z&se=2026-11-03T00%3A41%3A31Z&sr=c&sp=r&sig=6iANNY8u%2F9FsVk8bpI7Ug2ze4GVYAY53pFG4ZRRzFig%3D)

Equipment Details page.

There are different Custom Reports available. See below.

![A screenshot of a social media post  Description automatically generated](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/fcm-navigation-%E2%80%93-main-menus-and-detail-pages-image-k4xjp5ny.png?sv=2026-02-06&spr=https&st=2026-11-02T23%3A41%3A31Z&se=2026-11-03T00%3A41%3A31Z&sr=c&sp=r&sig=6iANNY8u%2F9FsVk8bpI7Ug2ze4GVYAY53pFG4ZRRzFig%3D)

Available custom reports.

## **QR Code**

The *QR code generating* button can be used to generate a QR code for the specific equipment. When the code is scanned with a QR code scanner, or regular camera apps, with QR code recognition, it will lead the user to the Equipment Details page in IMS.

![A screenshot of a social media post  Description automatically generated](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/fcm-navigation-%E2%80%93-main-menus-and-detail-pages-image-omio8ph1.png?sv=2026-02-06&spr=https&st=2026-11-02T23%3A41%3A31Z&se=2026-11-03T00%3A41%3A31Z&sr=c&sp=r&sig=6iANNY8u%2F9FsVk8bpI7Ug2ze4GVYAY53pFG4ZRRzFig%3D)

"QR code generating" button.