--- title: "FCM Release 2022.1" slug: "fcm-release-20221" updated: 2026-10-27T23:12:31Z published: 2026-10-27T23:12:31Z canonical: "ims-handbook.cenosco.com/fcm-release-20221" --- > ## Documentation Index > Fetch the complete documentation index at: https://ims-handbook.cenosco.com/llms.txt > Use this file to discover all available pages before exploring further. # FCM Release 2022.1 April 2022 Version 2022.1 brings updates to existing features of IMS FCM, mostly focused on easier job management and capturing flange information. --- ## Highlights ### Grayloc and Clamp Export [IMSFB-28791](https://cenosco.myjetbrains.com/youtrack/issue/IMSFB-28791) A Grayloc-Workpack export is now available for Jobs. It contains the following Grayloc and Clamp information: | Protocol | Equipment | | --- | --- | | Job Name | Strategy | | Job description | Clamp Size [inch] | | Job date | Stud Size [inch] | | Condition History | Wrench Size [inch] | | Description | Hub Size [inch] | | Planned Event | Seal Ring size [inch] | | Planned Event Description | Torque [lbf-ft] | | Unit | Stud Grade | | Flange FLOC | Nut Material | | FLOC Description | Clamp material | | Floc 1 | Shrouded | | Floc 2 | Hub Material | | Critical Joint | Seal ring material | | Hub thickness | Pipe Wall Thickness [inch] | | Seal Angle [deg] | Pipe Schedule | | Seal length [inch] | Drawing | | Non-Erosion Ring | Isometric Number | | Heat Trace LOTO | P&ID | ![Graphical user interface, text, email Description automatically generated](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/fcm-release-2022.1-image-5shzyy3v.png?sv=2026-02-06&spr=https&st=2026-10-28T15%3A58%3A33Z&se=2026-10-28T16%3A58%3A33Z&sr=c&sp=r&sig=YByUYzMLrDTXtYLzicGVkqEAqdFDp3HAXgL7eLwDYHY%3D)Figure 1: The Grayloc-Workpack export is available via the Export button in the Job Main Screen. ### Second Flange Material [IMSFB-28046](https://cenosco.myjetbrains.com/youtrack/issue/IMSFB-28046) It is now possible to capture two materials for a Flange. Users can enter the Second Flange Material in the Flange design section. It is also available for imports/exports and in Specs. Take note that the material lookups are based on the first Flange Material, not on the Second Flange Material. ![Graphical user interface, text, application Description automatically generated](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/fcm-release-2022.1-image-lpgvk9jb.png?sv=2026-02-06&spr=https&st=2026-10-28T15%3A58%3A33Z&se=2026-10-28T16%3A58%3A33Z&sr=c&sp=r&sig=YByUYzMLrDTXtYLzicGVkqEAqdFDp3HAXgL7eLwDYHY%3D)Figure 2: The Second Flange Material is entered in the Flange Design section.  ### Flange Sizes in NPS and DN [IMSFB-20521](https://cenosco.myjetbrains.com/youtrack/issue/IMSFB-20521) In the Flange Design section, in addition to the NPS Flange Size, the equivalent DN Flange Size is now also shown. If desired, users can define the Flange by selecting the DN value from the dropdown. In this case the equivalent NPS Flange Size will also be shown. ![Graphical user interface, application Description automatically generated](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/fcm-release-2022.1-image-5qwmoj96.png?sv=2026-02-06&spr=https&st=2026-10-28T15%3A58%3A33Z&se=2026-10-28T16%3A58%3A33Z&sr=c&sp=r&sig=YByUYzMLrDTXtYLzicGVkqEAqdFDp3HAXgL7eLwDYHY%3D)Figure 3: Both NPS and DN values are now shown in the Flange Design section. ![Graphical user interface, table Description automatically generated](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/fcm-release-2022.1-image-xh6rjqcy.png?sv=2026-02-06&spr=https&st=2026-10-28T15%3A58%3A33Z&se=2026-10-28T16%3A58%3A33Z&sr=c&sp=r&sig=YByUYzMLrDTXtYLzicGVkqEAqdFDp3HAXgL7eLwDYHY%3D)Figure 4: Flange Size can now also be defined by selecting a DN value from the dropdown.  ## FCM Improvements ### Reviewing Dropdown lists in Settings [IMSFB-14468](https://cenosco.myjetbrains.com/youtrack/issue/IMSFB-14468) [IMSFB-28690](https://cenosco.myjetbrains.com/youtrack/issue/IMSFB-28690) To increase transparency, the FCM dropdown lists are now shown in Settings. Go to Settings \ Maintenance \ FCM Specific Data \ Dropdowns. Gasket Materials, Gasket Types and Ring Material dropdown lists are currently available here. ![Graphical user interface, application Description automatically generated](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/fcm-release-2022.1-image-u01aijwo.png?sv=2026-02-06&spr=https&st=2026-10-28T15%3A58%3A33Z&se=2026-10-28T16%3A58%3A33Z&sr=c&sp=r&sig=YByUYzMLrDTXtYLzicGVkqEAqdFDp3HAXgL7eLwDYHY%3D)Figure 5: Dropdown lists are shown in Settings.   ### “Flange 2” available in FLOC & Equipment grids [IMSFB-29904](https://cenosco.myjetbrains.com/youtrack/issue/IMSFB-29904) For a FLANGE-FLOC it is possible to capture information for both sides of the Flange. The two sides are called “Flange 1” and “Flange 2”. Both sides are now available fields in the FLOC and Equipment Main Screen grids. ![Graphical user interface Description automatically generated](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/fcm-release-2022.1-image-2eo6vkhd.png?sv=2026-02-06&spr=https&st=2026-10-28T15%3A58%3A33Z&se=2026-10-28T16%3A58%3A33Z&sr=c&sp=r&sig=YByUYzMLrDTXtYLzicGVkqEAqdFDp3HAXgL7eLwDYHY%3D)Figure 6: Both the Flange sides can be shown in the FLOC and Equipment Main Screen grid.  ### New Nut Material and Flange Material option [IMSFB-27981](https://cenosco.myjetbrains.com/youtrack/issue/IMSFB-27981) Both the Nut Material and Flange Material options are customizable. However, both these lists now have an additional default option: - New option for Nut Material: A194-4L - New option for Flange Material: CAST IRON ### Pump Pressure Specs [IMSFB-29080](https://cenosco.myjetbrains.com/youtrack/issue/IMSFB-29080) Pump pressure can give useful information when it comes to managing Jobs on Flanges. Thus, FCM now has the option to capture PUMP PRESSURE A and B as Flange Specs. ![Table Description automatically generated](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/fcm-release-2022.1-image-djg1110d.png?sv=2026-02-06&spr=https&st=2026-10-28T15%3A58%3A33Z&se=2026-10-28T16%3A58%3A33Z&sr=c&sp=r&sig=YByUYzMLrDTXtYLzicGVkqEAqdFDp3HAXgL7eLwDYHY%3D)Figure 7: New pump pressure Specs.  ### A Renaming Import [IMSFB-29838](https://cenosco.myjetbrains.com/youtrack/issue/IMSFB-29838) Similar to PEI, FCM now also supports a rename import, which can be used to rename Flange FLOCs and Equipment. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/fcm-release-2022.1-image-2uh8340k.png?sv=2026-02-06&spr=https&st=2026-10-28T15%3A58%3A33Z&se=2026-10-28T16%3A58%3A33Z&sr=c&sp=r&sig=YByUYzMLrDTXtYLzicGVkqEAqdFDp3HAXgL7eLwDYHY%3D)Figure 8: The Rename import template. ## --- ## Resolved issues | Module | Count | | --- | --- | | Reporting | 4 | | Other | 3 | | **Total** | **7** | ##