---
title: "FCM Release 2022.4 Draft"
slug: "fcm-release-20224"
updated: 2026-10-27T23:12:31Z
published: 2026-10-27T23:12:31Z
canonical: "ims-handbook.cenosco.com/fcm-release-20224"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://ims-handbook.cenosco.com/llms.txt
> Use this file to discover all available pages before exploring further.

# FCM Release 2022.4

December 2022

Release 2022.4

---

## Design Screen Improvements

### Pinning on the Design Screen

The Pin feature now also works on the Design Main Screen. A user can pin any number of Equipment / FLOCs, and the the Design Main Screen will then be filtered for these pinned Equipment / FLOCs. Items can also be pinned directly from the Design Main Screen.

![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/release-notes-ims-2022.4-draft-business-area-1--blue-yellow--orange-image-erq3oqmu.png?sv=2026-02-06&spr=https&st=2026-10-28T16%3A36%3A37Z&se=2026-10-28T17%3A36%3A37Z&sr=c&sp=r&sig=hff26yJ0NKYA86tPI1dftGpYz8JhrSulUCWyZVKRwds%3D)

### Link Redirection

The redirection of the links has also been updated. If a user is, for example, in the PEI module, and copies an URL that redirects the user to the Design Screen in FCM, then the users module is automatically changed to the FCM module.

## ASME B16.5 PCC-1 calculation

[IMSFB-34401](https://cenosco.myjetbrains.com/youtrack/issue/IMSFB-34401)

A new Calculation Dynamic Form was created for Norco. The primary purpose of the form is to demonstrate the ability to perform calculations using Dynamic forms and the built-in calculator engine. This Form is limited to:

- Class 300 flanges,
- Material SA-105,
- Stud material SA-193 Gr. B7,
- Spiral Wound gasket,
- Imperial units of measurement for input.

The new form (“PCC-1 B16.5 24"-300#”) is available on [https://ims-wb-norco.cenosco.software/#fcmdesign](https://ims-wb-norco.cenosco.software/#fcmdesign)

![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/release-notes-ims-2022.4-draft-4.3-image-f5lwoafi.png?sv=2026-02-06&spr=https&st=2026-10-28T16%3A36%3A37Z&se=2026-10-28T17%3A36%3A37Z&sr=c&sp=r&sig=hff26yJ0NKYA86tPI1dftGpYz8JhrSulUCWyZVKRwds%3D)

Existing calculations can be found in the dropdown menu.

![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/release-notes-ims-2022.4-draft-4.3-image-kg5ei9q5.png?sv=2026-02-06&spr=https&st=2026-10-28T16%3A36%3A37Z&se=2026-10-28T17%3A36%3A37Z&sr=c&sp=r&sig=hff26yJ0NKYA86tPI1dftGpYz8JhrSulUCWyZVKRwds%3D)

Color coding of fields:

- Blue: The field are expected to be filled in. The value is used for the calculation of another field.
- White/grey: This field is optional. The value is not used for calculating other fields.
- Green: This value is calculated based on an input and the result can be used by other green fields.

## Custom DF Checklists available on ECHs

[IMSFB-26125](https://cenosco.myjetbrains.com/youtrack/issue/IMSFB-26125/Consider-using-dynamic-forms-in-FCM-instead-of-protocols)

Dynamic Forms can be used to configure custom Checklists. Now both custom Checklists and standard Protocols are available on FCM's Equipment Condition Histories. Below you see an example of a new Checklist. To switch back to the standard Protocols, click **Switch to protocols**.

![Graphical user interface, application Description automatically generated](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/pic%201(600).png?sv=2026-02-06&spr=https&st=2026-10-28T16%3A36%3A37Z&se=2026-10-28T17%3A36%3A37Z&sr=c&sp=r&sig=hff26yJ0NKYA86tPI1dftGpYz8JhrSulUCWyZVKRwds%3D)

When on a standard Protocol, you can click **Switch to checklist** to see the available custom Checklists.

![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/pic%201(599).png?sv=2026-02-06&spr=https&st=2026-10-28T16%3A36%3A37Z&se=2026-10-28T17%3A36%3A37Z&sr=c&sp=r&sig=hff26yJ0NKYA86tPI1dftGpYz8JhrSulUCWyZVKRwds%3D)

Take NoteIf you switch to Protocols, after already filling in you Checklist data, all filled in data will be deleted, and vice versa.