---
title: "Hydrocor Case Study"
slug: "hydrocor-co2-use-case"
updated: 2026-10-27T23:12:11Z
published: 2026-10-27T23:12:11Z
canonical: "ims-handbook.cenosco.com/hydrocor-co2-use-case"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://ims-handbook.cenosco.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Hydrocor Case Study

> [!NOTE]
> Take Note
> 
> This article explains how to creating and running a new CO2 corrosion assessment using the [Full Hydrocor](/v414/docs/learn-about-full-hydrocor) module for a Pipeline in the IMS system:

- Open the Pipeline’s “HC10_Case01_02_03_CO2_corrosion” Equipment Details Page.
- Open the Internal Corrosion Module.

![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/Screenshot_628.jpg?sv=2026-02-06&spr=https&st=2026-10-28T19%3A11%3A52Z&se=2026-10-28T20%3A11%3A52Z&sr=c&sp=r&sig=g5K3%2BLNxmd26a0xGEI6UABDJ7GHuSkru79zeaMjH3FA%3D)

- In the Hydrocor section, click the + button to create a new Assessment.

![A screenshot of a computer AI-generated content may be incorrect.](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/hydrocor-image-t0s39hcf.jpg?sv=2026-02-06&spr=https&st=2026-10-28T19%3A11%3A52Z&se=2026-10-28T20%3A11%3A52Z&sr=c&sp=r&sig=g5K3%2BLNxmd26a0xGEI6UABDJ7GHuSkru79zeaMjH3FA%3D)

- Enter the Date as “01/Jun/2025”.
- Enter the assessment Name as “Case 1 CO2 corrosion”.
- Click **Save**.

![A screenshot of a computer AI-generated content may be incorrect.](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/hydrocor-image-434j2y1j.jpg?sv=2026-02-06&spr=https&st=2026-10-28T19%3A11%3A52Z&se=2026-10-28T20%3A11%3A52Z&sr=c&sp=r&sig=g5K3%2BLNxmd26a0xGEI6UABDJ7GHuSkru79zeaMjH3FA%3D)

- Click the Hydrocor icon to open the Hydrocor Application.

![A screenshot of a computer AI-generated content may be incorrect.](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/hydrocor-image-x6s6u6b3.jpg?sv=2026-02-06&spr=https&st=2026-10-28T19%3A11%3A52Z&se=2026-10-28T20%3A11%3A52Z&sr=c&sp=r&sig=g5K3%2BLNxmd26a0xGEI6UABDJ7GHuSkru79zeaMjH3FA%3D)

- Select the **1 Settings** tab.
- Under Degradation Mechanisms select the “CO2” checkbox.

![A screenshot of a computer AI-generated content may be incorrect.](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/hydrocor-image-nin6acj0.jpg?sv=2026-02-06&spr=https&st=2026-10-28T19%3A11%3A52Z&se=2026-10-28T20%3A11%3A52Z&sr=c&sp=r&sig=g5K3%2BLNxmd26a0xGEI6UABDJ7GHuSkru79zeaMjH3FA%3D)

If you are running Hydrocor inside IMS PLLS the Service Type, Pipeline Diameter, and Length fields are automatically populated using information from the Pipeline Design Data.

- To modify the Service Type, Pipeline Diameter, or Length, return to the Pipeline’s Equipment Details page PL Design Data section.
- Click **Edit** and update the parameters as follows::
  - Pipeline Length: 1000m
  - Nominal Diameter: 12”​
  - Service Type: Multiphase gas/condensate

![A screenshot of a computer AI-generated content may be incorrect.](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/hydrocor-image-qp6z6fcl.jpg?sv=2026-02-06&spr=https&st=2026-10-28T19%3A11%3A52Z&se=2026-10-28T20%3A11%3A52Z&sr=c&sp=r&sig=g5K3%2BLNxmd26a0xGEI6UABDJ7GHuSkru79zeaMjH3FA%3D)

- Click **Save**.
- Click the *Internal Corrosion* icon, then select the *Hydrocor* icon to return to the Hydrocor Application.
- Select the **2 Main Input** tab and specify the following parameters:
  - CO2 content gas = 2 mole%​
  - Pressure inlet = 120 bara​
  - Temperature inlet = 60°C​
  - Ambient temperature = 7°C​
  - Gas flow rate = 0.5 mln Sm3/d​
  - Oil/Condensate flow rate = 200 m3/d​
  - Water flowrate = 150 m3/d

![A screenshot of a computer AI-generated content may be incorrect.](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/hydrocor-image-uufyk6kk.jpg?sv=2026-02-06&spr=https&st=2026-10-28T19%3A11%3A52Z&se=2026-10-28T20%3A11%3A52Z&sr=c&sp=r&sig=g5K3%2BLNxmd26a0xGEI6UABDJ7GHuSkru79zeaMjH3FA%3D)

- Click the *Run and Save* button to execute the corrosion prediction case.

![A screenshot of a computer AI-generated content may be incorrect.](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/hydrocor-image-4k20n7lo.jpg?sv=2026-02-06&spr=https&st=2026-10-28T19%3A11%3A52Z&se=2026-10-28T20%3A11%3A52Z&sr=c&sp=r&sig=g5K3%2BLNxmd26a0xGEI6UABDJ7GHuSkru79zeaMjH3FA%3D)

- Review outputs including corrosion rates, material recommendations, and visualization profiles.

![A screenshot of a computer AI-generated content may be incorrect.](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/hydrocor-image-5c374d2v.jpg?sv=2026-02-06&spr=https&st=2026-10-28T19%3A11%3A52Z&se=2026-10-28T20%3A11%3A52Z&sr=c&sp=r&sig=g5K3%2BLNxmd26a0xGEI6UABDJ7GHuSkru79zeaMjH3FA%3D)