PLSS Schedules

Take note This overview explains the Schedules in IMS PLSS. To learn more about Schedules see IMS Schedules (across Disciplines) . In PLSS, Schedules are created at the Equipment level. A Schedule contains information on: When to perform an...

Take note In this overview, the IMS PLSS Schedule Types will be explained. In PLSS four Schedule Types have been implemented. A Schedule can be created for: An Inspection (ILI run, collect CP data, …). An Assessment (RBA Assessment, Inter...

Take note Below the PLSS Schedule Lifecycle, from adding (creating) the Schedule to Approving it, is explained. The lifecycle steps can be summarized as follows: Add (create) the Schedule. Specify the Schedule Scope  (this is the Equipm...

Take Note This overview will explain how to use and interpret the IMS-PLSS Schedules Main Screen. The Schedules Main Screen shows an overview grid, with a list of Schedules. To see the list of registered Schedules, click on Schedules in the ...

Take Note This overview explains how to create Schedules in IMS-PLSS. Creating a Schedule  To create a Schedule: On the Main Menu of the Schedules Main Screen or from the Equipment Details Page , click on   the Plus button...

Take note This overview explains how to use and interpret the PLSS Schedules Details Page. The information on When to perform an action, What to do, and How to do it can be found or added here. It has the following seven sections: Head...

Take note This overview explains how to approve PLSS Schedules.  When you are done creating an Inspection Schedule , the Schedule will be inactive and will still have a Draft Approval Status . The SAP Status on the Schedule will also be...

Take note This overview will explain how to change the Next Inspection Date of PLSS Schedules in bulk. It is possible to change the NID (Next Inspection Date) of the PLSS Schedules in Bulk.  In the example below, the assumption is that the...

Take Note This overview will explain how to tie PLSS Schedules to Upcoming Events. All PLSS Schedules can be linked to a Planned Event. This is extremely helpful when packaging Schedules that will be done during a turnaround (TA) or similar even...

Take note In this overview, you can see a IMS-PLSS Schedule with Inspection Locations The Inspection Locations can be selected on the Plan Codes . In this example, manifold Equipment has the following Inspection Locations : Inspection...