Setup Register of Civil Assets and Risks
- 7 Articles
- Published on Mar 9, 2026
The first Step in setting up a Register of Civil Assets and Risks is to define the Asset in IMS. Methodology A pre-selection of what civil assets are to be included in a CIVIL database should be carried out. Typically, a study focuses...
- Published on Mar 9, 2026
After your Civil Asset has been defined in IMS, you can start the RBI Analysis. Methodology The key question here is: “What would happen if we would do nothing?” This means, we only react to the equipment when it triggers our attention....
- Published on Mar 9, 2026
The first step, after you have started your Civil RBI Analysis is to determine the Condition Status for you Component-DM combination. Methodology The key question here is: “What was the condition status of the Component or asset during the...
- Published on Mar 9, 2026
When you are done setting the Conditions Status for the RBI Analysis, you need to estimate the Remaining Life. This only applies for Age-Related DMs. Methodology The key question here is: “When do we expect the failure scenario to occur?...
- Published on Mar 9, 2026
As part of the Civil RBI Analysis you must determine the Probability of Failure (for Age-Related DMs) or Likelihood of Failure (for Non-Age-Related DMs). Methodology The overall question here is: “What is the probability/likelihood that ...
- Published on Mar 9, 2026
As part of the Civil RBI Analysis determine the Consequence of the Component failing. Methodology The consequences resulting from the failure are rated in accordance with the consequences scale of a Risk Assessment Matrix (RAM) as implem...
- Published on Mar 9, 2026
When both the Consequence and Probability/Likelihood of Failure has been determined for the Component-DM, you can review the Criticality. Methodology Criticality and Failure Risk for Age-Related Failures The Criticality is the base risk...