--- title: "Configuring the CMMS Mapping in Settings" slug: "cmms-mapping-settings" tags: ["Settings", "General"] updated: 2026-03-09T10:15:31Z published: 2026-03-09T11:26:34Z canonical: "ims-handbook.cenosco.com/cmms-mapping-settings" --- > ## Documentation Index > Fetch the complete documentation index at: https://ims-handbook.cenosco.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring the CMMS Mapping in Settings ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/pic%201(269).png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A41%3A15Z&se=2026-11-22T14%3A41%3A15Z&sr=b&sp=r&sig=TOQrb8kLov6w%2FEs2T1qLvaLODKGjPDvh0wn53Ch06z4%3D)Configuration subsections. The Mapping section of the **Settings** Menu is used for the CMMS (e.g. GSAP) interface. Four sections are used for the Mapping configuration: - Mapping: Here the Mapping actions, and by whom those action ("THEY"/"US") are initialized, are defined. - Our Field: Here, for each selected Mapping action, (up to) 5 Mapping fields can be defined. - Their Field: Here, for each selected Mapping action, (up to) 5 Mapping fields can be defined. - Value Maps: This section maps values to either the Our FieldsĀ or the Their Fields (depending on whom is initializing the Mapping action). Mapping is done as shown in the image below. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/configuration-image-2yanzjzk.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A41%3A15Z&se=2026-11-22T14%3A41%3A15Z&sr=b&sp=r&sig=unULxL7ua6f910QLeIxokO3HvGGfd1Zrm8iXv5Wd2TQ%3D)Mapping of the Our Fields and Their Fields to the Values.