PEI Degradation Management - Theory

Prev Next
  • Published on Mar 9, 2026
This online manual explains the background theory of Degradation Management: What Degradation Management is. What Degradation Mechanisms (DMs) are. What Barriers are. What a Corrosion Management Framework (CMF) is.  How Corrosion Loo...
  • Updated on Aug 31, 2026
  • Published on Mar 9, 2026
Degradation Management is a continuous work process. The figure below depicts this process in IMS.  The continues Degradation Management Work Process as implemented in IMS.  The S-RBI Analysis or RBI 581 Analysis is implemen...
  • Published on Mar 9, 2026
Take Note This section of the Handbook introduces the theoretical underpinnings of Degradation Management in IMS. To learn more about the individual Degradation Modules used in IMS, see: Degradation Modules Overview . Degradation Management i...
  • Updated on Oct 27, 2026
  • Published on Mar 9, 2026
As mentioned in Degradation Classification , the DMs can be classified in terms of the failure characteristics (see the figure below): Age-Related (AR) failures (e.g., Pitting, general Corrosion ), and Non-Age-Related (NAR) failures (e.g., C...
  • Updated on Aug 31, 2026
  • Published on Mar 9, 2026
Age-Related Degradation Mechanisms are mostly Corrosion mechanisms, with two exceptions: Creep (e.g., fired heater tubes), and Low-Cycle Fatigue or Cyclic Loading (e.g., pressure-swing absorber vessel). Remnant Life For Corrosion, the time...
  • Updated on Sep 2, 2026
  • Published on Mar 9, 2026
Degradation Management is about verifying Barriers in order to manage the risk of threats.  Definition The threats are, of course, caused by the Degradation Mechanisms and Barriers are risk controls or recovery measures. Barriers provide th...
  • Published on Mar 9, 2026
During the Threat and Barrier identification, Equipment and piping within a site’s unit or plant, with similar Degradation Mechanisms (DMs) , should be grouped into manageable sections that can be monitored. In IMS these groups are called Corrosion...
  • Published on Mar 9, 2026
The Integrity Operating Windows (IOWs) are defined as limits on process variables, beyond which the operating facility integrity deteriorates rapidly, leading to unsafe conditions. Impact can be a shortening of the remaining lifecycle of the asset a...
  • Published on Mar 9, 2026
NACE International, NACE SP 0472-2015-SG - Methods and Controls to Prevent In-service Environmental Cracking of Carbon Steel Weldments in Corrosive Petroleum Refining Environments , 2015. BS-EN-13306-2010 - Maintenance Terminology, 2010.  A...