--- title: "FCM Workflow" slug: "fcm-workflow" tags: ["FCM"] updated: 2026-03-12T07:06:18Z published: 2026-03-12T07:06:18Z canonical: "ims-handbook.cenosco.com/fcm-workflow" --- > ## Documentation Index > Fetch the complete documentation index at: https://ims-handbook.cenosco.com/llms.txt > Use this file to discover all available pages before exploring further. # FCM Workflow ## FCM Workflow Summary The basic workflow in FCM follows the following steps: 1. Inherit hierarchy (Functional Locations (FLOCs) and Equipment) from IMS PEI (or IMS RCM). 2. Create Flange Connections to Equipment with Flange-FLOCs. Flange FLOCs are Level 5 FLOCs. 3. Create Flange and Clamp (Grayloc) Equipment containing: - Tightening data and recommended specification. - Flange integrity calculations. - Schedule. 4. Create Jobs, which can include Flanges and/or Clamps. 5. Record your activities in Equipment Condition Histories (ECH). The figure below shows a schematic overview of the basic FCM Workflow. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-1700490110166.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A05%3A20Z&se=2026-11-22T15%3A05%3A20Z&sr=b&sp=r&sig=6nXBy1d%2BTvlsbfAZ%2FWtZRgvuxWk6U%2FimL74XWX3btkw%3D) FCM Workflow.