--- title: "Importing, assigning and handling files on a Condition history - Hexagon" slug: "importing-assigning-and-handling-files-on-a-condition-histo" updated: 2026-03-09T10:15:35Z published: 2026-03-09T11:26:39Z canonical: "ims-handbook.cenosco.com/importing-assigning-and-handling-files-on-a-condition-histo" --- > ## Documentation Index > Fetch the complete documentation index at: https://ims-handbook.cenosco.com/llms.txt > Use this file to discover all available pages before exploring further. # Importing, assigning and handling files on a Condition history - Hexagon This article explains how images can be imported from Hexagon (HxGN) into IMS. We will explain how to add/assign or remove any given file (image/drawing) in terms of visibility across ECHs and other related entities. Note: Your site must have the Interface configuration enabled and properly configured to receive images from Hexagon. IMS supports two options: 1. [Use once](/v410/docs/clone-strategy-based-maintenance-plan-cmms-inbound-sync-1#how-to-attachassign-files-to-only-one-ech) – Attach/assign the drawing to only one ECH. 2. [Use permanent](/v410/docs/clone-strategy-based-maintenance-plan-cmms-inbound-sync-1#how-to-attachassign-files-to-multiple-echs) – The drawing is assigned to the Equipment (not the ECH) and will be visible on all ECHs of that equipment. It cannot be removed from an individual ECH. ## Definitions and scope | Term | Definition | | --- | --- | | Hexagon | Centralized image (drawing) repository. It is a standalone tool not governed by IMS. | | Sync direction | Unidirectional synchronization from Hexagon to IMS. | | Files (image/drawing) | Refers to files that are fetched from Hexagon. | ## Prerequisites > [!NOTE] > Important > > The site must have a properly configured interface with Hexagon to fetch drawings. > > The [Application setting](/v410/docs/application-settings) “Search SDX Configuration” should be turned on. ## How to attach/assign files to only one ECH To attach/assign files to only one ECH: - Open the Condition History Main Screen (grid list). - Select the desired ECH in the list to open the Details Page. - Scroll down to the Drawings and Documents section. - Click **Search for Drawings and Documents**. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-FHJFWNQB.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A05%3A24Z&se=2026-11-22T15%3A05%3A24Z&sr=b&sp=r&sig=3nzhxyKteJUt4fx1wdraspPfLRGnY8Mff3e4hG3jLZk%3D) - Click **Search** to fetch available files. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-GZJFYCA1.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A05%3A24Z&se=2026-11-22T15%3A05%3A24Z&sr=b&sp=r&sig=Q%2F%2F6zUbo8PUcj3%2Bhe7iTvmXFXqKfutUGhKd7JK5lK64%3D) Note: FLOC and Equipment references are pre-populated. You can narrow down the search according to File Type and Source**.** ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-86RGRYBB.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A05%3A24Z&se=2026-11-22T15%3A05%3A24Z&sr=b&sp=r&sig=TbQAv%2Ba%2B8VqpS58WY1LgDiM9gCpVOSgpXirj%2BtLvLxM%3D) - Click **Search**. - Select the files. - Click **Use once**. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-U8SMVC3O.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A05%3A24Z&se=2026-11-22T15%3A05%3A24Z&sr=b&sp=r&sig=kPUb%2BvSlHjYw3MW1TpwzVK%2BGjFU7VckVtD91o%2BGkX7M%3D) The files are visible only on the ECH that you attached them to. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-YJ47GWLN.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A05%3A24Z&se=2026-11-22T15%3A05%3A24Z&sr=b&sp=r&sig=FFplfxhN%2FRLqvEDagVMqAkth%2FB8iG8KoNlmI1f5gOO4%3D) > [!NOTE] > Take Note > > Other ECHs of the same Equipment will not contain these files. > > ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-UKBOMPYK.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A05%3A24Z&se=2026-11-22T15%3A05%3A24Z&sr=b&sp=r&sig=hRs4Y2Fp76od0QQInqwh1zdiGHkdshWUPrsHbUzWq9M%3D) ## How to attach/assign files to multiple ECHs To attach/assign files to multiple ECHs: - Open the ECH Main Screen (grid list). - Select the desired ECH in the list to open the Details Page. - Scroll down to the Drawings and Documents section. - Click **Search for Drawings and Documents**. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-FHJFWNQB.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A05%3A24Z&se=2026-11-22T15%3A05%3A24Z&sr=b&sp=r&sig=3nzhxyKteJUt4fx1wdraspPfLRGnY8Mff3e4hG3jLZk%3D) - Click **Search** to fetch available files. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-GZJFYCA1.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A05%3A24Z&se=2026-11-22T15%3A05%3A24Z&sr=b&sp=r&sig=Q%2F%2F6zUbo8PUcj3%2Bhe7iTvmXFXqKfutUGhKd7JK5lK64%3D) Note: FLOC and Equipment references are pre-populated. You can narrow down the search according to File Type and Source**.** ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-86RGRYBB.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A05%3A24Z&se=2026-11-22T15%3A05%3A24Z&sr=b&sp=r&sig=TbQAv%2Ba%2B8VqpS58WY1LgDiM9gCpVOSgpXirj%2BtLvLxM%3D) - Click **Search** (see 1). - Select the files (see 2). - Click **Use permanent** (see 3). ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-TKDE5OV0.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A05%3A24Z&se=2026-11-22T15%3A05%3A24Z&sr=b&sp=r&sig=obLsdwTkH23cIZB7nhrVHvAg5cQPadpbtqtvQzjyvR8%3D) > [!NOTE] > Take note > > Because the files are attached at the Equipment level, they are visible in all corresponding Condition Histories associated with that Equipment. > > ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-NRFHRXXB.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A05%3A24Z&se=2026-11-22T15%3A05%3A24Z&sr=b&sp=r&sig=ccW0xVsg%2BX1ZtRNZPFnl6%2FaVItUQH51X1l75Xiu64IY%3D) > > > > > > ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-Z7MS64QS.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A05%3A24Z&se=2026-11-22T15%3A05%3A24Z&sr=b&sp=r&sig=yHsjeZaQhhIU9PwUtRido7IFPYFMGIwo9E0b5YABoN4%3D) Note: Files added/assigned using the *Use permanent* option are also visible on the corresponding parent Equipment. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-BD2KRMN3.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A05%3A24Z&se=2026-11-22T15%3A05%3A24Z&sr=b&sp=r&sig=s2fRaImZlZT7CHcHAJ6%2BOP521jEZI8YH2JkCrgzNXxM%3D) ## How to remove/unassign files from one ECH To remove/unassign files from one ECH: - Open the Condition History Main Screen (grid list). - Select the desired ECH in the list to open the Details Page. - Scroll down to the Drawings and Documents section. - Hover over the file you want to remove/unassign. Note: The files that are added using the *Use once* option will be candidates for removal/un-assignment. The ones that are added via *Use permanent* option will not. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-SRWQA2UK.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A05%3A24Z&se=2026-11-22T15%3A05%3A24Z&sr=b&sp=r&sig=ISkMXJieXtCSWttgKxb8DxT1hcjXZAXruhxQNG9vlGU%3D) - Click the **X** button on the file you wish to remove/un-assign. - Unassign the file by confirming the dialogue. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-TCPSL07R.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A05%3A24Z&se=2026-11-22T15%3A05%3A24Z&sr=b&sp=r&sig=EWAlu3EYLIXEWfaHSeDXIyK5burA%2B709QDf8JljqU1Q%3D) ## How to remove/unassign files from multiple ECHs > [!NOTE] > Take note > > To remove/unassign files from the ECHs that were assigned using the Use permanent option, navigate to the corresponding parent Equipment. To remove/unassign files from multiple ECHs: - Open the Condition History Main Screen (grid list). - Select the desired ECH in the list to open the Details Page. - Click on the Equipment ID to open the Equipment Details Page. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-MS55B89H.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A05%3A24Z&se=2026-11-22T15%3A05%3A24Z&sr=b&sp=r&sig=cOZIGE%2Bn1pOv%2F8jkNlUCsioPOFtltTqZWyIrXF4n38k%3D) - Scroll down to the Drawings and Documents section of that Equipment. - Hover over the file you want to remove/unassign. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-7ULL8VID.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A05%3A24Z&se=2026-11-22T15%3A05%3A24Z&sr=b&sp=r&sig=Z5%2BJBgvJ5O6GgPebT%2BeHuqHvcwEGOEZQwORkD2Uhp1I%3D) - Select the **X** button on the file you wish to remove/un-assign. - Unassign the file by confirming the dialogue. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-4ZCW6973.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A05%3A24Z&se=2026-11-22T15%3A05%3A24Z&sr=b&sp=r&sig=%2F3aQL5oe90rtlbTE%2FYk3dk8zPfdIc5xkZb%2F7WE%2BR8Uo%3D)