--- title: "PEI Circuits - Main Screen" slug: "pei-circuits-main-screen" tags: ["Circuits", "Search, Filter", "PEI"] updated: 2026-03-09T10:15:50Z published: 2026-03-09T11:26:46Z canonical: "ims-handbook.cenosco.com/pei-circuits-main-screen" --- > ## Documentation Index > Fetch the complete documentation index at: https://ims-handbook.cenosco.com/llms.txt > Use this file to discover all available pages before exploring further. # PEI Circuits - Main Screen The Circuits Main screen shows an overview grid, with a list of Circuits.

Listing Circuits (the Overview Grid)

To see the list of registered Circuits: - Go to the IMS Main Menu. - Click **Circuits** to go to the Circuits main screen. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/pei-circuits---main-screen-image-ak3omg84.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A37%3A23Z&se=2026-11-22T14%3A37%3A23Z&sr=b&sp=r&sig=wYcg6KF1ro9oyLvTg45UB8WrMic10a6Ikf1o3uEhQ84%3D) Click on the Circuits Main menu, to list all Circuits. - Use the scoping bar, the filter, or the search functionality to list the desired Circuits. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/pei-circuits---main-screen-image-wm397dar.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A37%3A23Z&se=2026-11-22T14%3A37%3A23Z&sr=b&sp=r&sig=wcJlsIcQCl8BrqBGzvivl%2Bx8a9383QlS0hhlE6%2FjFhA%3D) Find Circuits using the scoping bar / filter / search functionality. - If desired, expand or collapse a Circuit record using respectively the ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/pei-circuits---main-screen-image-zb303jta.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A37%3A23Z&se=2026-11-22T14%3A37%3A23Z&sr=b&sp=r&sig=CHlymjosMuvFEWSzcssLsshnlvLeUYTEf7jJUcxyo%2FQ%3D) and ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/pei-circuits---main-screen-image-62au46y9.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A37%3A23Z&se=2026-11-22T14%3A37%3A23Z&sr=b&sp=r&sig=%2BNqGYDmLLa6RFkLNvBpO1%2BuZDGLJMuBtiY4x57LAYrI%3D) button in the record row. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/pei-circuits---main-screen-image-tkqzi9lw.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A37%3A23Z&se=2026-11-22T14%3A37%3A23Z&sr=b&sp=r&sig=psoC%2B6reZSuc0JLnNckxlHFxnLjW%2F%2BAtFSRS48QR%2Bs8%3D) The Circuits Main Screen, showing one record expanded. - Each record shows several fields, summarizing the Circuits (see the table below). To see more, click on the Settings icon in the toolbar and add additional fields. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/pei-circuits---main-screen-image-g86h36tc.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A37%3A23Z&se=2026-11-22T14%3A37%3A23Z&sr=b&sp=r&sig=P01NI%2FryZL0Vcd4cBi3Xhzug%2Bnx7X%2FzkRSB7t7%2BpgUs%3D) Click on the settings icon to modify the grid. Default Circuit data in the Circuit record: | Section | Field /Column | Description | | --- | --- | --- | | Hierarchy | RL Classification | The Remnant Life icon shows the (worst) remaining life classification for the selected Circuit: ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/pei-circuits---main-screen-image-qn2kom0t.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A37%3A23Z&se=2026-11-22T14%3A37%3A23Z&sr=b&sp=r&sig=Ao3lj9COYMzeE1wGj7K1SWpXCEXBdJdf3KJmgZ4j2nk%3D) >= 2 SD intervals ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/pei-circuits---main-screen-image-ptxzqflp.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A37%3A23Z&se=2026-11-22T14%3A37%3A23Z&sr=b&sp=r&sig=8fx7jL5jBQFnv3D4HMIoLaIQkk%2F5gCRdhXwxqjfWhoY%3D) >= 1 and < 2 SD intervals ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/pei-circuits---main-screen-image-ntuek8vt.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A37%3A23Z&se=2026-11-22T14%3A37%3A23Z&sr=b&sp=r&sig=RJnBm6DeyszzVJyKZ713sV1F%2BnhNzAm2BdHpdwJCZME%3D) Less than SD interval Less than 1 year remaining ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/pei-circuits---main-screen-image-yr6z9rzp.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A37%3A23Z&se=2026-11-22T14%3A37%3A23Z&sr=b&sp=r&sig=gPrBa3ym8qpwa8gTg8RHpKn7clvx4XPlBDMiUAOlGac%3D) (SD = Shutdown = the Unit’s Turnaround date) | | Active | The Active flag shows for each Circuit whether it is active or inactive: ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/pei-circuits---main-screen-image-a4ibn9gs.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A37%3A23Z&se=2026-11-22T14%3A37%3A23Z&sr=b&sp=r&sig=oJgYhAJMIf7gKljKCxehh41r5xRRO0VSExNARxhnRjE%3D) Active Circuit ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/pei-circuits---main-screen-image-2is0e3mq.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A37%3A23Z&se=2026-11-22T14%3A37%3A23Z&sr=b&sp=r&sig=lkJgZheEnl0Wpz23ka23yOaRZoGaD5MwAyhiRaNY2b8%3D) Inactive Circuit | | Circuit ID | Name of the Circuit, click on the Circuit ID to open the Circuit details. | | Description | Short Description for the selected Circuit. | | Equipment ID | Equipment to which the Circuit is assigned to, click on the Equipment ID to open the Equipment details. | | Unit | Unit to which the Circuit and Equipment is assigned to. | | Component ID | Component from which the Circuit can inherit Interval Factor (optional). | | Schedules | Next Insp Date | Next Inspection Date of Circuit’s assigned Corrosion Schedule. | | Pending NID | When there is an unapproved event, the pending next inspection date is shown. This will be the actual next inspection date once approved. | | Exact Time Interval | Worst time interval on corrosion Schedule, either time based or calculated. | | Remnant Life | (Worst) Remnant Life Date from calculated CMLs. | | Calculation Summary (IDAP) | Total IF | Driving Interval Factor (IF) from either RBI or IMS. | | IF Strategy | Circuit’s Interval Factor Strategy, either LOWEST, IMS or RBI. | | LID | Last Inspection Date or last date for which Measurement data is registered. | | SCR | Suggested Corrosion Rate. | | Governing Rate | This is the driving (worst) CR, from Short, Long, etc. | | Required Inspection Method | A required Inspection Method (e.g. UT, RT) can be set for all measurement for the Circuit (optional). This will then show here. | | Basis | Governing basis from the current Calculation Summary. | | Pending status | Type of Inspection Event (i.e. Insp Complete, Recalculation) from the current Calculation Summary. | | Status | Status of the current Calculation Summary. | | Special Emphasis | [Special Emphasis](/v410/docs/special-emphasis-overview) being registered for the Circuit (only applicable for some Equipment Groups). | | Labels | Custom labels which can be assigned to each record. | | Calculation Method | Applied Calculation method, either: - PLR, PSR, CAR, LR (including Circuit averages) - PLR, PSR, LR Default Calc Method is set automatically based on Equipment Group for the Circuit. |

Circuits Menu Toolbar

There are several shortcuts or available features that the Circuit toolbar can be used for. For more information on the Toolbar see [IMS Main Screen (Grid List)](/v410/docs/basic-navigation-other-main-menu-options).

Filtering Circuits

From the Circuits overview page, several filters can be used to drill down the search results for the shown list of Circuits. To filter a list: - Click on the *filter* button. - Check the filters that you want to use. - Click **Show …**. For more information on filters see [IMS Main Screen (Grid List)](/v410/docs/basic-navigation-other-main-menu-options).

Moving Circuits

From the Circuit main grid, items can be moved to another Equipment, using ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/pei-circuits---main-screen-image-e6ljw33f.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A37%3A23Z&se=2026-11-22T14%3A37%3A23Z&sr=b&sp=r&sig=%2Bb8xuq1jS%2BSXaNc6lCOElo3IXy2HuG8gk4MDMZ%2FEFxo%3D) button in the Toolbar. A new screen will appear where the user can select the new Parent (i.e. Equipment) to which the Circuit will be moved. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/pei-circuits---main-screen-image-8m05syrj.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A37%3A23Z&se=2026-11-22T14%3A37%3A23Z&sr=b&sp=r&sig=aVWMKeibwr3NYcguX1sm65Pgtd0PAVkdCClPoBDfiX0%3D) Select a Circuit and click the Move button to move it to another Equipment. ## Calculating Circuits in Bulk Circuit calculations can be completed and approved in bulk from the Circuits Main Grid. To bulk-calculate Circuits: - Navigate to the Circuits Main Grid. - Select the desired Circuits which you wish to Calculate. - Click the **Calculate Multiple Circuits** icon in the toolbar. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-KE4LMJBU.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A37%3A23Z&se=2026-11-22T14%3A37%3A23Z&sr=b&sp=r&sig=dh3OlDV8WfF2znihO0S5kETHPPtWKdiFmuoZ%2B5FEk%2Bw%3D) Click **Calculate Multiple Circuits.** - Confirm the Circuits you wish to calculate in the **Select the circuits you want to recalculate** dialog. - Click **Calculate all**. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-6VFWLMS3.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A37%3A23Z&se=2026-11-22T14%3A37%3A23Z&sr=b&sp=r&sig=s6%2FL%2BcxuHYlxZH9o%2FLgSJJstboRdaMY53aLw9dm0k2s%3D) Select Circuits and click **Calculate All**. ## Approving Circuit Calculations in Bulk To bulk-approve Circuit Calculations: - Navigate to the Circuits Main Grid. - Select the Circuits which you wish to Approve. - Click the **Approve Multiple Events** button. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-AK3Z1KS0.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A37%3A23Z&se=2026-11-22T14%3A37%3A23Z&sr=b&sp=r&sig=AO2G3jx%2FW78S44rJOKGwEZviuB7%2FJ%2BEZfDH6aTGmT4Y%3D) Select Circuits and Click **Approve**. - Confirm the Circuits which you would like to approve in the **Select the circuits you want to approve/disapprove** dialog. - Click **Approve** or **Disapprove.** ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-YSL52X8A.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A37%3A23Z&se=2026-11-22T14%3A37%3A23Z&sr=b&sp=r&sig=ZrFnaa8Q5eg999FZ3vWuJ5QRnryBOXvDGv%2FOv7ap5SY%3D) Select Circuits and click **Approve** or **Disapprove**. > [!NOTE] > User Note > > To learn more about creating and managing Measurement Sets, see: [Managing Measurement Sets](/v410/docs/managing-measurement-sets).