PEI EVA
- 1 Sub categories
- 7 Articles
- Published on Mar 9, 2026
This online manual explains: The EVA (Extreme Value Analysis) methodology in IMS. Methodology Overview EVA (Extreme Value Analysis) is a statistical method to calculate the maximum Wall Loss, from a smaller representative sample, e....
- Updated on Sep 2, 2026
- Published on Mar 9, 2026
Preparation for doing an EVA. Some preparation is needed before you can start an EVA (Extreme Value Analysis). When the hierarchy (Equipment, Circuit, CMLs and MSETs) is set up, the inspection data must be inputted into the MSETs, and then...
- Published on Mar 9, 2026
Doing the EVA. You are ready to start the Extreme Value Analysis when: EVA is activated; The CMLs have measurements; The Nominal WT and Renewal thickness are filled in for all the CMLs with measurements; and The Equipment has...
- Published on Mar 9, 2026
Doing the EVA. When the EVA calculation is done, it is time to review the results. The purpose of the Goodness of the Fit tests is to investigate how well a given sample of data approximates a given probably distribution. Failing t...
- Published on Mar 9, 2026
Implementing EVA results. Lastly, after you did the EVA , you need to close the loop by calculating the NID for the Corrosion Schedule … Approve the Calculation Summary The Calculation Summary summarizes the different methods (e....
- Published on Mar 9, 2026
Advanced users can change some of the EVA calculation settings: The EVA Settings button. EVA Setting Click on the Settings button , next to the Calculate button on the top of the EVA page . Click Edit to change ...
- 4 Articles
- Published on Mar 9, 2026
Extreme Value Analysis for Heat Exchanger tube inspection in S-IDAP: Theory, Agnieszka Ostrowska & Fred Hoeve (TheoryEVA_HX_Course_Theory_Nov_2009 (2) (002).pptx) S-IDAP tool Module EVA for heat exchanger tubes - GSEA/1 (Fred Hoeve, Phil Jonat...