--- title: "S-IDAP Isometric Tab" slug: "s-idap-isometric-tab" updated: 2026-03-09T10:15:52Z published: 2026-03-09T11:26:46Z canonical: "ims-handbook.cenosco.com/s-idap-isometric-tab" --- > ## Documentation Index > Fetch the complete documentation index at: https://ims-handbook.cenosco.com/llms.txt > Use this file to discover all available pages before exploring further. # S-IDAP Isometric Tab The Isometric tab is available in [View 1 (opening screen)](/docs/an-overview-of-the-trending-and-corrosion-analysis-module) / [View 2](/docs/an-overview-of-the-trending-and-corrosion-analysis-module#view-2-displaying-the-trendplots). By selecting this tab, the AutoCAD isometric is displayed. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/tab-isometrics-image-tbfebc1a.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A47%3A24Z&se=2026-11-22T14%3A47%3A24Z&sr=b&sp=r&sig=yPFRSasDbwMDRY0kTBPPtUrmlhsVxKyZ0Ho%2FEQQwrhs%3D) Screen functionalities: - Colouring CMLs: You can choose to colour the CMLs using the following options from the dropdown box: - (DLM) CR - this has been selected in the above example. - ShortCR - LongCR - Remaining Life (RL) - Type (e.g., Elbow, Tee) - Last Inspection Date - Selected CML (for the next inspection) - Scrolling and Moving: These actions can be performed using the buttons located in the upper left corner of the screen. Zooming can be done using the mouse wheel. - Colour Settings: This option allows you to set the colour of the CML based on CR, RL, inspection technique, etc. - Isometric Settings: This option allows you to configure the settings for AutoCAD, including block references and attributes. For a more detaill on AutoCAD isometrics, refer to [IMS Drawings](/v410/docs/ims-drawings)*.* Dynamic Linear Model (IDAP) Short term Corrosion Rate Long term Corrosion Rate Remnant Life (= RCA / SCR) Condition Monitoring Location or Condition Measurement Location (sometimes also referred to as TML (Thickness Measurement Location))