--- title: "S-IDAP Overview Plot Tab" slug: "s-idap-overview-plot-tab" updated: 2026-03-09T10:15:52Z published: 2026-03-09T11:26:46Z canonical: "ims-handbook.cenosco.com/s-idap-overview-plot-tab" --- > ## Documentation Index > Fetch the complete documentation index at: https://ims-handbook.cenosco.com/llms.txt > Use this file to discover all available pages before exploring further. # S-IDAP Overview Plot Tab The Overview Plot tab is available in [View 1 (opening screen)](/docs/an-overview-of-the-trending-and-corrosion-analysis-module) / [View 2](/docs/an-overview-of-the-trending-and-corrosion-analysis-module#view-2-displaying-the-trendplots). With this tab selection, the screen displays the Corrosion Rate, the Remnant Life, or the Wall Thickness of each CML and their Measurement Position (MP) in a bar chart. So, the number of bars is equal to the number of rows in the [Results tab](/v410/docs/s-idap-results-tab) or [Measurements tab](/v410/docs/s-idap-measurements-tab). Red crosses mark a detected anomaly in the reading. To adjust the Overview plot: - Switch between (filter for) different Corrosion Rates (CRs), Remnant Life’s (RLs) and Wall Thickness: - Click on the **Overview Plot** tab and click the *Settings* button. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/tab-overview-plot-image-cwbxk0zb.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A47%3A16Z&se=2026-11-22T14%3A47%3A16Z&sr=b&sp=r&sig=5VvBjib3oW2hrSJh%2FwSzqN9jqeZLBodtXGInKXQg7Xs%3D) ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-WVSP2TG5.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A47%3A16Z&se=2026-11-22T14%3A47%3A16Z&sr=b&sp=r&sig=rZN4P3l5UeSjgTiKMh1UlUh0VlJrqo2YW9snjuDXl64%3D) - Select the desired RL or CR or Wall Thickness. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-ABNR9OZC.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A47%3A16Z&se=2026-11-22T14%3A47%3A16Z&sr=b&sp=r&sig=tJLXcJuTviaBXGewWo1MNvdmk8TxjOX784L2m2vC7nc%3D) **Example** The above image is an example of a Corrosion Rate overview plot. From this plot it can be seen that: - The bar chart shows the Corrosion Rate (in mm/y or inch/y) for each feature in the stratum/Circuit. The number of bars is equal to the number of rows in the [Results tab](/v410/docs/s-idap-results-tab), so it shows all the CML/MPs from the selected Circuits. - The blue dotted line is the suggested Corrosion Rate, in this example it is 0.1 mm/y (2.5mpy). - The red cross means an Anomaly has been detected in the data. - The color of the bar represents the CML type, for example an Elbow is red and a Straight is blue. To change the colors click the *Settings* button in the Details Page header. - To change the colors of the CML Type click the *Settings* button in the Details Page header. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-A137R45R.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A47%3A16Z&se=2026-11-22T14%3A47%3A16Z&sr=b&sp=r&sig=Ipb4mw0M6Kt8ReNnSU5bK49ccsJkLVE3HD4fKYmf6ck%3D) CML type colors can be changed via the Details Page Setting button in the header. - To learn more about an Overview plot click on the *Legend* button: ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-SQ2HEKNO.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A47%3A16Z&se=2026-11-22T14%3A47%3A16Z&sr=b&sp=r&sig=pGLONcUBlkWB6ldJcxim%2BK0h6IuRt1AXG0UjKhHb%2Fp0%3D) - To display only options for wall loss check the Wall Loss box. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-LGTEYQLY.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A47%3A16Z&se=2026-11-22T14%3A47%3A16Z&sr=b&sp=r&sig=MxRvl0FrebeKyH3FImHZVEc59GSbQfEs2WelXBLvjD4%3D) - To Zoom in / out click the *Magnifier* button and pull the arrows to the right range. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-60LD55NR.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A47%3A16Z&se=2026-11-22T14%3A47%3A16Z&sr=b&sp=r&sig=J4KKDQ1xBrQeoJDm3DPMRN%2BMHLVe5cgE71L%2Bw5Th7UQ%3D) To show the labels below the Overview Plot click **Show i**n the IDAP Details Page header. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-16LVN6JE.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A47%3A16Z&se=2026-11-22T14%3A47%3A16Z&sr=b&sp=r&sig=BrPZVNwXWttKFosXLGbv275vkhkoZOVHhSLKmPthBno%3D) Condition Monitoring Location or Condition Measurement Location (sometimes also referred to as TML (Thickness Measurement Location))