--- title: "S-IDAP TrendPlots" slug: "s-idap-trendplots" updated: 2026-03-09T10:15:52Z published: 2026-03-09T11:26:46Z canonical: "ims-handbook.cenosco.com/s-idap-trendplots" --- > ## Documentation Index > Fetch the complete documentation index at: https://ims-handbook.cenosco.com/llms.txt > Use this file to discover all available pages before exploring further. # S-IDAP TrendPlots The Trendplots are are shown in the bottom of [View 1 (opening screen)](/docs/an-overview-of-the-trending-and-corrosion-analysis-module) / [View 2](/docs/an-overview-of-the-trending-and-corrosion-analysis-module#view-2-displaying-the-trendplots). ## Number of Plots The number of Trendplots displayed depends on the number of rows visible in the [Results tab](/v410/docs/s-idap-results-tab) or [Measurements tab](/v410/docs/s-idap-measurements-tab). For example, if the number of rows is set to 25, then 25 Trendplots will be displayed. ## Adjusting Y-Axis You can specify the minimum (Min WT) and maximum (Max WT) values for the y-axis on the left side of the Trendplots. This feature is useful for comparing data from piping with the same diameter and Nominal Wall Thickness. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-UOVQI4SK.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A47%3A25Z&se=2026-11-22T14%3A47%3A25Z&sr=b&sp=r&sig=VGmsBfA2dynarI8WJ%2BzmOt%2B8HvivhE8aBWLPADfiioA%3D) ## Verifying Reading A reading can be set to Good, Verified or Ignored by pressing the *right* mouse on a reading in the TrendPlot. You can also select “Mitigation” (to [create a CAIR](/vv410/docs/defining-cairs)) or add Notes or an Attachment. If readings have been set to “Ignore” or “Verified” you have to click **Save** to start the re-calculation. ![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/image-WZ68Z5ZC.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A47%3A25Z&se=2026-11-22T14%3A47%3A25Z&sr=b&sp=r&sig=wH8AunNVT0NAZBAeV8UMlqTIVENpE3AICuwydlWZSbQ%3D) To learn more about reviewing and verifying error reading see [Data Quality (Identifying Anomalies)](/docs/data-quality-identifying-anomalies#reviewingverifying-error-readings). ## CR shown The Maximum Corrosion Rate is shown as Cri in the title bar of the plot.