---
title: "Special Emphasis Configuration"
slug: "special-emphasis-configuration"
updated: 2026-10-27T23:11:52Z
published: 2026-10-27T23:11:52Z
canonical: "ims-handbook.cenosco.com/special-emphasis-configuration"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://ims-handbook.cenosco.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Special Emphasis Configuration

The available Special Emphasis types are defined in Settings. For each type, inspection intervals are configured. Your CSA can add or change this data.

## Special Emphasis Types

For each Special Emphasis Equipment, different classes can be defined. This configuration is done in [Settings \ Maintenance \ Inspection/Schedules \ Special Emphasis](/v414/docs/inspection-schedules-settings).

![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/special-emphasis-configuration-image-94cqpjmi.png?sv=2026-02-06&spr=https&st=2026-10-28T12%3A45%3A40Z&se=2026-10-28T13%3A45%3A40Z&sr=c&sp=r&sig=wzdADeLrWdVFkGizzLwX7jlovzZtF%2BFDGkpWakv4SqQ%3D)Special Emphasis classes are defined in settings.

This configuration is done per site. The table below shows the Special Emphasis types typically available. The full list of available (and non-expired) Special Emphasis types can be found in the Settings (see the figure above).

Special Emphasis types:

| Category | Special Emphasis |
| --- | --- |
| Injection Points | IP: CLASS. A (12 MO. MAX) |
| IP: CLASS. B (36 MO. MAX) |
| IP: CLASS. C (36 MO. MAX) |
| IP: CLASS. D (72 MO. MAX) |
| IP: CLASS. E (120 MO. MAX) |
| IP: CLASS. E (96 MO. MAX) |
| IP: CLASS. F (NO MAX) |
| Corrosive Deadleg | DL: CLASS. A (12 MO. MAX) |
| DL: CLASS. B (24 MO. MAX) |
| DL: CLASS. C (36 MO. MAX) |
| Unstable Deadleg | Unstable: CLASS. A (12 MO. MAX) |
| Unstable: CLASS. B (36 MO. MAX) |
| Unstable: CLASS. C (36 MO. MAX) |
| Soil to Air | SOIL TO AIR |

## Configuration of Max interval and Default interval

For each Special Emphasis Type, a Default interval, as well as a Max interval, is configured in [Settings \ Maintenance \ Configuration \ Configuration per Hierarchy Type](/v414/docs/hierarchy-type-configuration-in-setting).

A Special Emphasis is configured per:

- FLOC Type,
- Equipment Type, and
- Schedule Type.

For each of the above combinations a Default interval, as well as a Max interval, is set. This will impact the interval on the Corrosion / Inspection Schedule. The below figure gives an example of an Injection Point (IP) configuration for a PIPE-FLOCs.

![Graphical user interface, table  Description automatically generated](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/special-emphasis-configuration-image-xv1imnyj.png?sv=2026-02-06&spr=https&st=2026-10-28T12%3A45%3A40Z&se=2026-10-28T13%3A45%3A40Z&sr=c&sp=r&sig=wzdADeLrWdVFkGizzLwX7jlovzZtF%2BFDGkpWakv4SqQ%3D)Special Emphasis (IP) configuration for PIPE-FLOCs.