---
title: "Specifications/ECH Settings"
slug: "specifications-ech-settings"
tags: ["settings"]
updated: 2026-10-27T23:11:28Z
published: 2026-10-27T23:11:28Z
canonical: "ims-handbook.cenosco.com/specifications-ech-settings"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://ims-handbook.cenosco.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Specifications/ECH Settings

![](https://cdn.document360.io/e492a0e0-a4ba-4aca-8fc6-76b95f91fdf3/Images/Documentation/maintenance-image-d9z6birz.png?sv=2026-02-06&spr=https&st=2026-10-28T14%3A19%3A30Z&se=2026-10-28T15%3A19%3A30Z&sr=c&sp=r&sig=434LH2IqhHR3Bt%2FfthvWy%2F4Hx62%2FPOA8ofVAvOUp9jo%3D)Maintenance subsections.

In the Specifications/ECH section of the **Settings** Menu the ECH is configures. The ECH is used to register the condition information in which Equipment was found. This can then be used for repair analysis.

## Condition Found

Here the Conditions Found can be viewed/edited/added/deleted. Different Condition can be specified when configuring the Conditions Found. These are based on the configured Conditions (see below).

## ECH Checklist

Here the ECH Checklist that can be selected in the Condition History Module can be viewed / edited / added / deleted.

## Effectiveness

Here the Inspection Effectiveness levels can be viewed/edited/added/deleted.

## Unit of Measure

Here the Unit of Measure options can be viewed.

## Conditions

Here the Conditions can be viewed/edited/added/deleted.

## Conclusions

Here ECH Conclusion codes can be viewed/edited/added/deleted. By default Conclusion codes do not show on the [ECH](/v414/docs/step-a-creating-echs). This can be enabled via the [Application setting](/v414/docs/application-settings) "Enable Conclusions".