S-IDAP Overview Plot Tab

Updated on 31 Jan 2025
1 Minute to read
Contributors

Print
Dark
Light
PDF

Article summary

Did you find this summary helpful?

Thank you for your feedback

The Overview Plot tab is available in View 1 (opening screen) / View 2. With this tab selection, the screen displays the Corrosion Rate, the Remnant Life, or the Wall Thickness of each CML and their Measurement Position (MP) in a bar chart. So, the number of bars is equal to the number of rows in the Results tab or Measurements tab. Red crosses mark a detected anomaly in the reading.

To adjust the Overview plot:

Switch between (filter for) different Corrosion Rates (CRs), Remnant Life’s (RLs) and Wall Thickness:
- Click on the Overview Plot tab and click the Settings button.

Select the desired RL or CR or Wall Thickness.

Example

The above image is an example of a Corrosion Rate overview plot. From this plot it can be seen that:

The bar chart shows the Corrosion Rate (in mm/y or inch/y) for each feature in the stratum/Circuit. The number of bars is equal to the number of rows in the Results tab, so it shows all the CML/MPs from the selected Circuits.
The blue dotted line is the suggested Corrosion Rate, in this example it is 0.1 mm/y (2.5mpy).
The red cross means an Anomaly has been detected in the data.
The color of the bar represents the CML type, for example an Elbow is red and a Straight is blue. To change the colors click the Settings button in the Details Page header.