Assigning RSLs

Assigning an RSL to a Tag (Equipment or FLOC) using the Bulk Assign or the Plus button, will start the RSL Assign Wizard:

RAF 00a.png

In case of a straight hierarchy, with for example matching Location type + Equipment group + CMMS type the RSL will be found. Such a straigh hierarchy can be:

RAF 00.png

Suitable RSL not showing

However if there is a mismatch in the hierarchy, and a 'skewed' hierarchy is present, the wizard will not show a suitable RSL.

In above 'skewed' hierarchy example we see this setup:
RAF 01.png

RAF 02.png

When assigning an RSL to the 10PCV9902a-eq the wizard will not find a RSL as the Location type does not match the Equipment group neither the CMMS type.

Using the Filter in the RSL assign wizard

In the RSL assign wizard however, the Filter is extended with the Location type, Equipment group and CMMS type of the Tag:

RAF 03.png

Removing the Location type (TANK-FLOC) and Equipment group (CONTROL VALVE) will offer the RSLs for the E_MOT_LV.

RAF 04.png

Take Note

Using the Filter in the RSL assign wizard will allow you to assign RSLs with more freedom.
However, you, as end user, should then take care that the selected RSL match the Tag in the end.

Care Strategy RSL assignment

For Care Strategy RSL assignment you can disable de default Filters completely.

In below example the Location Type filter and Equipment group filter are disabled, and just the CMMS-Type filter is active, enabling to show the Care Strategy needed.

CS-RSL filter.png

Changing the RSL’s applicable CMMS Type (called Equipment Type)

Alternatively when the suitable RSL does not show, the RSL’s CMMS Types (called Equipment Types) can be updated. To do so:

Go to the RSL Details Page.
For the applicable Failure Mode click Edit.

Click the Add button.

Click the All Types Tab.

Select the Relevant CMMS Type.
Click OK.
Click Save.