Take Note
These Appendices describe how to enter data for the Past and Future corrosion rate and the Morphology (General, Grooving, or Pitting) will be described in the External Corrosion Module manually or in Bulk.
This appendix outlines four distinct scenarios based on whether data is entered manually or in bulk, and whether a Schedule is available or not.
Data Entry Method | Schedule Availability | Test Case |
|---|---|---|
Data manually added | Schedule not available | Case 1 |
Data manually added | Schedule available | Case 2 |
Data added in bulk | Schedule not available | Case 3 |
Data added in bulk | Schedule available | Case 4 |
The import files used in these Test Cases are available in the file below.
You can go through the test cases, as an exercise, by first performing the following steps:
Download the import file to your computer and unpack it.
Import Pipeline Equipment:
Go to the FLOC Main Screen.
Search for the FLOC "FLOC EC External Corrosion Test Case” and, if present, delete the Equipment under it.
If the applicable FLOC does not exist, create a FLOC with FLOC ID "FLOC EC External Corrosion Test Case".
Navigate to Settings \ Data Transfer \ Data Import.
Select the Pipeline Equipment template.
Click Browse.
Select the file "01 Import FLOC Equipm MAOP External Corrosion via ECH.xlsx" from your computer.
Click Next.
Select "Pipeline Equipment" from the drop-down menu.
Click Next two more times, and the Pipeline Equipment “EC External Corrosion Test Case P1” to “EC External Corrosion Test Case P6” will be created.
Import MAOP:
On the Data Import page, select MAOP history.
Click Browse.
Select the file "01 Import FLOC Equipm MAOP External Corrosion via ECH.xlsx" from your computer.
Click Next a few times.