Login
    • Beta
    Contents x
    S-IDAP TrendPlots
    • 20 Sep 2024
    • 1 Minute to read
    • Contributors
    • Print
    • Dark
      Light
    • PDF
    Contents

    S-IDAP TrendPlots

    • Updated on 20 Sep 2024
    • 1 Minute to read
    • Contributors
    • Print
    • Dark
      Light
    • PDF
    Article summary

    The Trendplots are are shown in the bottom of View 1 (opening screen).

    Number of Plots

    The number of Trendplots displayed depends on the number of rows visible in the Results tab or Measurements tab. For example, if the number of rows is set to 25, then 25 Trendplots will be displayed.

    Adjusting Y-Axis

    You can specify the minimum (MinWT) and maximum (MaxWT) values for the y-axis on the left side of the Trendplots. This feature is useful for comparing data from piping with the same diameter and Nominal Wall Thickness.

    Verifying Reading

    A reading can be set to Good, Verified or Ignored by pressing the right mouse on a reading in the trendplot. If readings have been set to Ignore or Verified the Save button has to be selected to start the re-calculation.

    To learn more about reviewing and verifying error reading see Data Quality (Identifying Anomalies).

    CR shown

    Both the DLM CR and driving Corrosion Rate are shown in the title bar of the plot.

    Was this helpful? Click to add feedback comments
    What's Next
    Change password!
    Changing your password will log you out immediately. Use the new password to log back in.
    Change profile
    Success!
    First name must have atleast 2 characters. Numbers and special characters are not allowed.
    Last name must have atleast 1 characters. Numbers and special characters are not allowed.
    Enter a valid email
    Enter a valid password
    Your profile has been successfully updated.
    Logout
    ESC

    Eddy AI, facilitating knowledge discovery through conversational intelligence