Configuration Settings

Prev Next
  • Published on Oct 27, 2026
Maintenance subsections. The Configuration section of the Settings Menu allows the user to modify application Settings and database Settings for the Site.  Note To be able to make changes to Configuration Settings, you will ne...
  • Published on Oct 27, 2026
Configuration subsections. The Application Settings  section in the Settings  Menu is a configuration screen for general features within IMS. Each record is a configuration setting and can have one of the following values/co...
  • Published on Oct 27, 2026
Configuration subsections. The Responsible Area section in the Settings Menu keeps information about the Plant ID, CI, MCE , PI Insp, PE , and Area and can be configured accordingly.
  • Published on Oct 27, 2026
Configuration subsections. Wall thickness measurements are requested per Condition Monitoring Locations (CML). Some of them might have a specific Measurement Point (MP) configuration. A MP is a location on an area on the Equipment/piping, wh...
  • Published on Oct 27, 2026
Configuration subsections. Locations (related to the CML MP configuration) are specified and maintained in the Matrix Location section of the Settings Menu. Usually, Locations are ranging from a to h, but can be changed on a Site’s own r...
  • Published on Oct 27, 2026
Configuration subsections. In the CML Types section of the Settings Menu different CML Types can be created and monitored. Sections can also be created and assigned to Matrix Locations . Setting up Sections for a CML Type To set u...
  • Published on Oct 27, 2026
In the Configuration per Hierarchy Type section of the Settings Menu, for each Hierarchy Type (i.e. Location Type, Equipment group, Component Type, and Circuit Type) several configurations can be set. The screen is split into 2 sections. ...
  • Published on Oct 27, 2026
Configuration subsections. In the  Default main tabs per User role section of the Settings Menu, the default main menu tabs are configured for each User Role (currently, this only applies to PEI). Each User can still modify h...
  • Published on Oct 27, 2026
Configuration subsections. In the Query tool intervals  section of the Settings Menu the different Query tool intervals are defined.
  • Published on Oct 27, 2026
Configuration subsections. The SAP Release date nr. days section of the Settings Menu is used to configure the number of days before the Next Inspection Date (NID) the SAP Release date get set for different Schedule types. In simple ter...
  • Published on Oct 27, 2026
Configuration subsections. The Mapping section of the Settings Menu is used for the CMMS (e.g. GSAP) interface. Four sections are used for the Mapping configuration: Mapping : Here the Mapping actions, and by whom those action ("THEY"...